API 5L X60 is a common high grade pipe material in API 5L specifciations for oil and gas transmissions. It's also called L415 pipe, which named by yield strength minimum in 415 Mpa (60,200 psi). It covers manufacturing types in seamless (hot rolled and colde rolled), and welded in ERW, LSAW, SSAW (HSAW).
The performances of the API 5L X60 L415 is great. The tensile strength of the API 5L X60 L415 is minimum at 75400 psi 520 Mpa, strength minimum 60,200 psi 415 Mpa. It could bear big stress in oil and gas pipe systems.
В прочность значения are same for the бесшовный сталь линия труба и сварной сталь линия труба в том числе ERW, LSAW, SSAW.
On the other hand, X60 PSL 1 and PSL 2 the minimum strength values are no different but PSL2 limits the maximum strength value. According to API 5L 46th edition 2018.
В корпус из API 5L X60 PSL1 pipe сварной типы:
Максимальный C Меньше чем или равно к {{0}}.26 percent , Si Less than or equal to 0.45, Mn Less than or equal to 1.4 percent , P Less than or equal to 0.{{10}}30 percent , S Less than or equal to 0.{18}}3% 7b{20}} percent , Cu Less than or equal to 0.50 percent , Nickel Less than or equal to 0.50 percent , Cr Less than or equal to 0.50 percent , Mo Less than or equal to 0.15 percent , and the sum of the Nb, V, Ti shall be Less than or equal to 0.06 percent . If the maximum content of the C reduce 0.01 percent % 2c Mn will be увеличенный 0.05 процент соответственно до к the maximum of 2.00 percent for API 5L Grade X60 PSL1 сталь линия трубы.
горячая этикетка : api 5l x60, Китай api 5l x60 производители, поставщики, фабрика